- Add non-standing pilot control to your Peterson Real Fyre gas log set
- Designed to be installed outside the firebox
- Includes adaptor plug and mounting bracket
- Ensure adequate space in your fireplace before purchase
- For use with Natural Gas log sets
This Peterson Real Fyre Pilot Kit is designed for use with Peterson Real Fyre Vented gas log sets using Natural Gas. It can be used with a vented match lit log set to add basic on/off wall switch or remote control and non-standing pilot. It can also be used in place of a manual safety pilot kit. Unit is designed to cut down on clutter in the fireplace by removing the gas line and pilot valve assembly from inside the fireplace. Control box must be installed outside of fireplace and wiring for the electronic non-standing pilot must be run from the control box to the fireplace gas log set. Unit must also be hard wired to a light switch for basic on/off wall switch operation. Best suited for new construction. To be used with 12 - 30 inch standard G4 and G45 burners, 12 - 16 inch see-thru G4 burners, or 18 - 30 inch see-thru G45 burners. Includes 48 inches of wiring from the control box to the log set. Powered by 110 volt AC adapter.
Legal disclaimers and warnings
Product packaging, owners’ manuals, installation instructions, and/or operating instructions may include more information than what is shown on our website. The content on our site is intended to be used for reference purposes only. Please fully read all included manuals and documentation before installing or using this product. WARNING for California residents: this product may contain chemical(s) known to the state of California to cause birth defects, cancer, or other reproductive harm.
- Model Number